Aegis® PCR-H135QP

1 of 35 products in this brand

Aegis® PCR-H135QP is a lubricated, high-viscosity nylon 6 extrusion-grade homopolymer composed of 100% post-consumer recycled materials. This product is designed for cast or blown film applications, it combines strength, toughness, and thermoforming properties with excellent heat, chemical, and abrasion resistance.

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion

Technical Data Sheet

Ask AdvanSix Questions

Thomas Clark avatarEd Asirvatham avatarJohn Facinelli avatar
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Chemical Family
Polyamides
Polymer Name
Polyamide 6 (PA 6)
Plastics & Elastomers Functions
Resin
Technologies
Plastics
Product Families
Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Materials Features
Abrasion Resistant,
Chemical Resistant,
Good Processability,
Good Strength,
Good Toughness,
Heat Resistance,
High Performance,
High Viscosity

Applications & Uses

Plastics & Elastomers End Uses
Blown Films,
Cast Films,
Film
Plastics & Elastomers Processing Methods
Blown Film Extrusion,
Cast Film Extrusion,
Extrusion,
Film Extrusion

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Viscosity (FAV)135-D-789
96% SAV3.75--
Melt Flow Rate (at 235°C/1.0 kg)1.2-D-1238
Density1.13g/cm³D-1505
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Point220°CD-3418
Gas Barrier Properties
ValueUnitsTest Method / Conditions
Oxygen Permeability40.3cc/m²/day-
Nitrogen Permeability14cc/m²/day-
Carbon Dioxide Permeability72.8cc/m²/day-
Moisture Properties
ValueUnitsTest Method / Conditions
Moisture Contentmax. 0.08%-
Extractable Contentmax. 0.8%-
Water Absorption (in 24 hrs)1.6%-
Equilibruim Moisture (at 50% RH)2.7%-
Saturation Moisture Content9.5%-

Regulatory & Compliance

Certifications & Compliance
EC Regulation 2011/10,
FDA 21 CFR 177.1500

Technical Details & Test Data

Extrusion Guidelines

Melt Viscosity vs. Temperature

Melting point: 220°C (428°F)
Melt Temperature Range: 232°C (450°F) to 271°C (520°F)
Two key factors affect the melt viscosity (stiffness or fluidity of the melt):
1. The molecular weight (Mw) of the resin: Higher Mw resins will have a higher melt viscosity than lower Mw resins.
2. Temperature of the melt for any given Mw resin: Higher process temperatures will provide a more fluid melt viscosity than lower process temperatures.


Typical Barrel Profile for Cast Films

Barrel: 230-260°C (446-500°F)
Adapter: 260-266°C (500-510°F)
Die: 260°C (500°F)
Process Melt Temperature: 260-270°C (500-518°F)


Typical Barrel Profile for Tubular (Blown) Films

Barrel: 246-254°C (474-490°F)
Adapter: 260°C (500°F)
Die: 254°C (490°F)
Process Melt Temperature: 254-260°C (490-500°F)
 

Screw Parameters

Metering Section: 40%
Transition Section: 3 to 4 flights
Feed Section: Balance of screw length
Compression Ratio: 3.5:1 to 4.0:1
L/D Ratio: 24:1
 

Metering Section Flight Depth

Screw Diameter Recommended Depth
1" 0.055"
1.5" 0.060"
2" 0.070"
2.5" 0.080"
3.5" 0.100"
4.5" 0.115"
6" 0.135"

Storage & Handling

Material Handling

Aegis® PCR-H135QP is supplied in sealed containers and drying prior to processing is not required. However, high moisture is the primary cause of processing issues. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level.