Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Specifications
Value | Units | Test Method / Conditions | |
Melting Point | 220 (428) | ºC (ºF) | ASTM D-3418 |
Typical Density | 1.13 | g/cm³ | ASTM D-1505 |
Value | Units | Test Method / Conditions | |
96% SAV | 2.72 | - | - |
Extractable Content | max. 1.2 | % | SOP-702-307 |
Moisture Content | max. 0.08 | % | ASTM D-6869 |
Viscosity (FAV) | 55 ± 3 | - | ASTM D-789 |
Storage & Handling
- Processing Guidelines
Material Handling
Aegis® PIR-H55ZI is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing issues. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C(176°F) is recommended. Drying time is dependent on moisture level. More information about safe handling procedures can be obtained by requesting the Safety Data Sheet.