Aegis® PIR-H85NP

1 of 14 products in this brand
Aegis® PIR-H85NP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H85NP, its standard, non-recycled counterpart.Aegis® PIR-H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Polymer Name: Polyamide 6 (PA 6)

Labeling Claims: Contains PIR Resin, Food Contact Acceptable, Recycled, Sustainable

Processing Methods: Blown Film Extrusion, Cast Film Extrusion, Extrusion, Extrusion Coating, Film Extrusion, Thermoforming

Density:: 1,130.0 kg/m³

Technical Data Sheet

Ask AdvanSix Questions

Thomas Clark avatarEd Asirvatham avatarJohn Facinelli avatar
View All Documents

Enhanced TDS

Identification & Functionality

Chemical Family
Polyamides
Polymer Name
Polyamide 6 (PA 6)
Plastics & Elastomers Functions
Resin
Technologies
Plastics
Product Families
Plastics — Basic Thermoplastics
Recycled Polymers
Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Labeling Claims
Contains PIR Resin,
Food Contact Acceptable,
Recycled,
Sustainable
Materials Features
Abrasion Resistant,
Chemical Resistant,
Food Contact Acceptable,
Good Strength,
Heat Resistance,
Homopolymer,
Improved Toughness,
Medium Viscosity,
Neat Resin

Applications & Uses

Markets
Consumer Goods,
Food & Nutrition,
Healthcare & Pharma,
Industrial,
Printing & Packaging
Applications
Consumer Goods — Other Consumer Goods Applications
Printing & Packaging — Packaging
Food & Beverage Packaging,
Industrial & Transport Packaging
Industrial — Paper & Pulp
Coated Paper & Paperboard
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses
Balloons,
Biaxially Oriented Film,
Book Covers,
Cast Films,
Fans,
Film,
Flexible Packaging,
Form Fill Seal Packaging,
Front Spoiler,
Monofilaments,
Netting,
Oriented Film,
Paper Coating,
Pouches Flexible Packaging,
Profiles,
Retort Pouches,
Shrouds,
Side Spoiler,
Tubing
Plastics & Elastomers Processing Methods
Blown Film Extrusion,
Cast Film Extrusion,
Extrusion,
Extrusion Coating,
Film Extrusion,
Thermoforming
Application

Aegis® PIR-H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film.

Properties

Physical Form
Pellets,
Solid
Thermal Properties
ValueUnitsTest Method / Conditions
Melting Point220 (428)°C (°F)D-3418
Typical Properties
ValueUnitsTest Method / Conditions
96% SAV3.19--
Density1.13g/cm³ASTM D-1505
Melt Flow Rate (at 235°C/1.0 kg or 455°F/1.0 kg)3.5g/10 minD-1238
Viscosity (FAV)85-D-789
Gas Barrier Properties
ValueUnitsTest Method / Conditions
Carbon Dioxide Permeability (at 23°C (73°F), 0% RH)72.8 (4.697)cc/m²/day (cc/100 in2/day)-
Nitrogen Permeability (at 73°F (23°C), 0% RH)14.0 (0.903)cc/m²/day (cc/100 in2/day)-
Oxygen Permeability (at 73°F (23°C), 0% RH)40.3 (2.600)cc/m²/day (cc/100 in2/day)-
Moisture Properties
ValueUnitsTest Method / Conditions
Equilibrium Moisture (at 50% RH)2.7%-
Extractable Contentmax. 0.6%-
Moisture Contentmax. 0.08%-
Saturation Moisture Content9.5%-
Water Absorption in 24 hrs1.6%-
Note

Aegis® PIR-H85NP conforms to FDA requirements of 21 CFR 177.1500 as well as EU Directive 2011/10/EC. Aegis® PIR-H85NP homopolymer possesses the combination of strength, toughness and thermoforming properties associated with nylon 6 as well as excellent heat, chemical and abrasion resistance.

Regulatory & Compliance

Certifications & Compliance
EC Regulation 2011/10,
FDA 21 CFR 177.1500,
FDA 21 CFR Regulations,
FDA Compliant

Storage & Handling

Material Handling

Aegis® PIR-H85NP is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing issues. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level. More information about safe handling procedures can be obtained by requesting the Safety Data Sheet.