Aegis® H155C1HXI is high viscosity nylon extrusion grade copolymer for monofilament trimmer line & fishline applications. Aegis® H155C1HXI possesses combination of excellent filament tenacity, flexibility, & transparency properties as well as excellent chemical/wear resistance.

Polymer Name: Polyamide (unspecified)

Processing Methods: Extrusion, Film Extrusion

Technical Data Sheet

Ask AdvanSix Questions

Thomas Clark avatarEd Asirvatham avatarJohn Facinelli avatar

Enhanced TDS

Identification & Functionality

Chemical Family
Plastics & Elastomers Functions

Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods


Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Moisture (Saturation)10%ASTM D-570
Melting Point187 (369)°C (°F)ASTM D-3418
Specific Gravity (at 23°C (73.4°F))1.12ASTM D-792
Extractable Content6.0 - 8.0%SOP-702-307
Moisture (at 50% RH)3.1%ASTM D-570
Pellet Properties
ValueUnitsTest Method / Conditions
Viscosity (FAV)125 - 145ASTM D-789
SAV (at 96% Sulfuric Acid)3.65 - 3.85
Bulk Density670kg/m³
Pellet ShapeCylindrical
Pellet Size1.9 - 2.5mm
Moisture Contentmax. 0.12%ASTM D-6869

Storage & Handling

Material Handling

This product is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing problems. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level. Further information concerning safe handling procedures can be obtained from the Safety Data Sheet. Alternatively, please contact your AdvanSix representative.