Visit advansix.com
All Categories
All Categories
Products
74
Brands
6
Documents
90
Markets
Technologies
Products
AdvanSix
Matching Products
Categories
(1)
Show All 1 Categories
Plastics
Plastics
Markets
Labeling Claims
Physical Form
All Filters
5 Products
found on AdvanSix
Most Viewed
TDS
With TDS
AdvanSix
Aegis® H8202NLB
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Compounding, Injection Molding
Flexural Modulus::
3010.0 - 3010.0 MPa
Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® H55C2ZP
Polymer Name:
Polyamide 6/66 (PA 6/66)
Processing Methods:
Extrusion Coating, Extrusion, Injection Molding, Compounding
Aegis® H55C2ZP is a 2.7 RV, unfilled, medium viscosity, non-lubricated, polyamide 6/66 copolymer for molding or compounding. With a broad processing window and excellent melt fluidity for filling thin sections, it provides exceptional processability. Aegis® H55C2ZP resin combines strength, stiffness and toughness with chemical and abrasion resistance. For glass- or mineral-filled applications, Aegis® H55C2ZP resin also offers superior surface appearance and low warp.
AdvanSix
Aegis® H35ZI
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Flexural Modulus::
2465.0 - 2465.0 MPa
Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® PIR-H8202NLB
Polymer Name:
Polyamide 6 (PA 6)
Labeling Claims:
Contains PIR Resin, Recycled, Sustainable
Processing Methods:
Injection Molding, Compounding
Density::
1130.0 - 1130.0 kg/m³
Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.
AdvanSix
Aegis® PIR-H35ZI
Polymer Name:
Polyamide 6 (PA 6)
Additives Included:
Lubricant (Unspecified)
Labeling Claims:
Contains PIR Resin, Recycled, Sustainable
Processing Methods:
Injection Molding
Density::
1120.0 - 1120.0 kg/m³
Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.